Specifications

Screen size

55"

Model No.

OP5558-G-SPL（standard）

OP5558-G-SPL（OPS）

display

Panel type

a-siTFT-LCD

type of light source

WLED

Page ratio

16：9

Natural resolution

1920(RGB)×1080，FHD

Frame rate

60Hz

Brightness cd/m² (Typ.)

700

Contrast (Typ.)

1400:1

bezel

0.88

Pixel pitch (H×V)(mm)

0.210×0.630

Point spacing (H×V)(mm)

0.630×0.630

Display color

16.7M

Display color gamut

1.06B , 99% sRGB

Viewing angle

178°

Response time (ms)

8(Typ.)(G to G)

Display mode

S-IPS，Normally black display, transmissive

Display area (H×V) (mm)

1209.6×680.4

life

≥50000h

power supply

Power parameters

AC 100～240V,50/60HZ

Whole machine power consumption (W)

<150W

Standby power consumption

<0.5W

Environmental conditions

Operating temperature

0℃～50℃

Working humidity

-20%～60%(No condensation)

Structure appearance

Whole machine size (W×H×D)（mm）

1211.4×682.2

Carton size

(W×H×D)(mm）

1285×765×190（1pc）（Ordinary carton）

1310×800×220（1pc）（Gravity carton）

1285×765×320（2pcs）（Ordinary carton）

1310×800×330（2pcs）（Gravity carton）

N.W.

20.39

24.59

G.W (1pc)

23.34

29.49

G.W. (2pcs)

23.89

29.69

Display drive scheme parameters

Port

Input：HDMI≥2,  DVI ≥1, VGA ≥1, DP ≥1、USB ≥1；

Output：HDMI≥1;
Control：RJ45 for RS232 IN ≥1、RS-232 OUT ≥1、IR；

Structure

Standard structure

Standard structure

Function

Ø ØSupport splicing, intelligent temperature control fan, color gamut adjustment technology, white balance adjustment technology, color temperature and brightness adjustment technology;

Ø ØSupport PIP picture-in-picture, PXP four-screen split function, support up to 4 signal interfaces (Max Res: 1080P@60Hz) synchronous decoding and display

Ø ØSupport AutoUniformity automatic brightness compensation technology: The grayscale data of 31x18 blocks of the screen is collected through color analysis, and the 558 blocks in the screen are separately compensated for brightness through the uniform intelligent algorithm of the AutoUniformity system to balance the brightness of each difference The dark difference is compensated according to the quality of the screen to achieve uniform brightness.

Ø ØAutoColor automatic color compensation technology: through the Auto Color system software to intelligently control the color analysis, and intelligently calculate and analyze the color accuracy difference of the color gamut, automatically generate the corresponding color data, and accurately perform sRGB, Adobe RGB and other color gamuts on the display Correction to achieve the color deviation index of the display DELTA E≤3% (that is, the color gamut coverage rate reaches 97% or more); even when the liquid crystal molecules of the screen itself are in good condition, it can achieve DELTA E≤1% (that is, : Color gamut coverage rate is over 99%).

Ø Ø3D LUT three-dimensional color control management: built-in 3D color check table function, can perform directional conversion of colors in the three-dimensional space constructed by RGB, 3D LUT performs accurate color correction and conversion in the three-dimensional color space, which can make the display of the picture The color is closer to the real picture, the color transition is natural and smooth, and the display effect is better.

Ø ØAuto White Balance and other technologies: With the help of a sophisticated color analyzer, grab the X, Y, and Z values ​​displayed by the 64-level white field signal of each display unit, and realize the automatic GAMMA curve through the built-in two-dimensional database Correction function. Realize the GAMMA display curve that tends to be consistent for each screen, realize the common curves such as GAMMA 2.2, and also realize the DICOM professional medical curve. Through this technology, the white field display color temperature between the screen and the screen can be close to the same, the color temperature display error is controlled within 3%-5%, and the dual mode of low blue light "eye protection mode" and "translucent mode" is supported.

Ø ØNo need for external equipment, realize HDMI daisy chain connection splicing, splicing supports real-time display according to the display ratio, and supports a single link connection of up to 20 screens. (Optional function)

Ø Support input signal detection function, DVI input and HDMI input interface have signal detection function, support automatically switch to another signal when one video signal is lost, realize signal backup function. (Optional function)